I got my Nano for Christmas. But it is more of a nightmare then it is fun .
First I am quite surprised that a Belgian company does not even has a manual in their native language.
Secondly the sites with manuals have been down several times.
Following it is a printer advertised for kids and starters (where it was bought). I laugh at this. No kid can assemble this on his own and for starters this is not a happy start.
Since i have a Mac and not a Windows, a specific question upon buying was if that would be a problem. Of course not, was the reply. Too bad the manual only makes references for programs to use in Windows. No reference to a program to use with Mac. Big Fail!
Since the kit has been assembled, i have had nothing but trouble and problems…
Every single problem you can imagine, i have experienced it.
- the Z will almost never calibrate correctly. not with the gcode, not manually
in the event it does happen to be correct, another part of the printer malfunctions.
- The nozzle has been blocked several times.
° The entry of the extruder cooler scraps the PLA, which causes blockage.
° PLA keeps on dripping from the nozzle, whenever the printer is on.
- The extruder has been blocked several times.
° Screws are too tight or too loose
° Coil spring was too long (impossible to handle the extruder to load PLA)
- The teflon tube has been blocked.
- By attempting to print something, steps are skipped.
- The leadscrew grins out the screw nuts. This causes them to loose their functions and they ‘leave’ the Y side axis holder when it moves. I have already replaced 4 M4 screws (both inox and iron) in 4 days…
- The fan against the extruder body does not work properly.
- The printer can start to move on its own and then crashes onto the bed.
I also tried calling the company in Gavere, but it seems the lady aswering the phone is not interested in helping out customers with problems…
Anyone here has some thoughts on what could be the problem(s)?