Fatal error on vertex


#1

Hello all contributors,

after leaving for a time my Vertex, i restarted recently.
So i have now a fatal error on a red box :

“a fatal error on the printer side stopped the printer until the error is fixed. Printer message :
Error: Printer stopped due to errors. Fix the error and use M999 to restart.
( temperature is reset. Set it after”

after restarted my vertex i had this error sometimes , when printing for ex.
But now it is when i want to connect my PC to the Vertex.
do somebody has some indication to find where this error is coming from my vertex.

Many thanks for your help

Joel


#2

Please show your printer settings?
Do you have problems when printing from the SD card?


#3

Check the temp on the display.
M999 means one of them is either reading 0C or 700+C
If you have 0C you have an open on the thermistor if you have 700C + you have a short on the thermistor.


#4

Hello VEL 337 and Wrong_Way.
I have not my printer settings available at this moment for answer to you.

BUT after this issue on the repetier, i tested successfully all fonction of the printer ( move axis, heating…) with the command button of the printer.
AND also i saw on the last line of the Blue screen of the printer : TEMP ERR…
After i did a reset of the printer with the printer and all the functions are operational now even on repetier.
I noticed also that on the printer settings ( on the bleu screen) that the Max extruder temperature was set at 250¨°. And i increased the temperature on repetier before my Fatal error… Perhpas is it the cause ?