I assembled the K8076. I use windows 8.1 and usb-serial converter. I also tested this device on windows 8.1 native serial port.
I runned the harware test and every led is enabled/disabled synchronous to the screen display.
I put an PIC 16F630 to the ZIF sockel and power on the device, after connecting it first to the serial port.
I select Function->Identify Connected PIC in PicProc2009 and the PIC is identified as 18F4420 (and not as 16f630) in the sockel.
What I already tested:
Condensators - OK
Resistor - OK
Diodes - OK
Transistors - OK
ICs - Not tested
Used different PIC, same error
I tried different Serial cables, same error
I don’t know what else I could do to fix this problem.
Thank you for you help, Louis