VM8095 4 or 8 Ohm loadspeaker?


#1

I have a VM8095 wich works fine. If i want to use the direct stereo speaker connection in stereo mode and connect two speakers, must i connect 4 ohm or 8 ohm speakers ?
Does this mean, i have to connect GND + left on on the first and GND + right on the second speaker.
The jumper for stereo/mono i have removed.

Regards Rainer


#2

Here are the specs

  • suitable for SD and SDHC cards
  • tested up to 32GB cards
  • supports ID3 TAG information: Title, Artist Name, Album Name and Year are displayed on the 2-line 16 char. LCD
  • supports folders to one level deep
  • up to 1024 folders, each containing up to 16384 songs
  • equalizer settings: Flat , Loudness, Heavy, Clear, Soft, Disco, Live and Hall
  • decodes MP3 (MPEG 1.0 & 2.0 audio layer III (CBR, VBR, ABR), Till 320kbit/s. Fraunhofer IIS and Thomson licensed
  • amplifier: 2x 5Wrms @ 4ohm
  • power supply: 12Vdc/1A
  • dimensions: 132 x 62mm / 5.2 x 2.45"

#3

Yes, that connection is OK.

You can also use 8 ohm speakers, but you get lower maximum audio power output.


#4

Many thanks for your quick answer. This information is excactly what i needed.